 |
 |
|
|
|
SERIES 1300 - FRODE PEDERSEN TEMPERATURE SENSORS
|
|
Application |
|
|
Measurement of temperature
in ducts and furnaces with air and flue gasses. The operating range is up to
800°C in the low-pressure range. |
1301 - Type A
Thermocouple assembly A with interchangeable measuring insert
|
|
Fields of application:
- Incinerators
- Power plants
- Chemical process engineering
Technical features:
- Thermocouple type J, K and N acc. to IEC-584-1
- Built acc. to DIN 43764
- Connected to the process by adjustable flange or compression fittings
- The measuring insert can be exchanged or calibrated without closing down the
process
- Protective tube in stainless and acid proof steel
- Modular design and standard length minimize the necessary number of spares
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet |
|
|
|
|
|
|
Application |
|
|
Measurement of temperature
in pipes and containers with gaseous and liquids media, such as air, vapors,
gasses, water and oil. The operating range is up to 800°C, max. 50 bar and flow
velocity up to 25m/sec (air) |
1304 - Type B
Thermocouple assembly B. Screw-in type with
interchangeable insert
|
|
Fields of application:
- Boilers
- Power plants
- Petro- and chemical process engineering
Technical features:
- Thermocouple type J, K and N acc. to IEC-584-1
- Permissible mechanical and thermal stress acc. to DIN 43763
- Connected to the process with a screwed attachment welded on the protective
tube
- The measuring insert can be exchanged or calibrated without closing down the
process
- Measuring insert is a mineral insulated type, vibration proof
- Protective tube stainless and acid proof steel
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet |
|
|
|
|
|
|
Application |
|
|
Measurement of temperature
in pipes and containers with gaseous and liquids media, such as air, vapour,
gasses, water and oil. The operating range is up to 800°C, max. 50 bar and flow
velocity up to 25m/sec (air) |
1305 - Type
BH
Thermocouple assembly BH, With interchangeable insert
and fast response time
|
|
Fields of application:
- Petro- and chemical process engineering
- Power plants
- Boilers
Technical features:
- Thermocouple type J, K and N acc. to IEC-584-1
- Permissible mechanical and thermal stress acc. to DIN 43763
- Connected to the process with a screwed attachment welded on the protective
tube
- The measuring insert can be exchanged or calibrated without closing down the
process
- Fast response time with OD 6 mm tip matched to the OD 3 mm insert
- Protective tube stainless and acid proof steel
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet |
|
|
|
|
|
|
Application |
|
|
Temperature
measurement in pipe systems and tanks with gasses and fluid medias such as air,
steam and water at high pressure and flow velocity. Operating range is up to
600°C, max. 450 bar (water) and 60 m/sec. (steam) |
1306 - Type D
Thermocouple assembly D, for welding with
interchangeable insert |
|
Fields of
application:
- Boilers
- Power plants
- Chemical process engineering
Technical features:
- Termoelement type J, K eller N iht. IEC 584-1
- Permissible mechanical and thermal stress acc. to DIN 43763
- Installed to the process by welding
- The measuring insert can be exchanged or calibrated without closing down the
process
- Measuring insert is a mineral insulated type, vibration proof
- Thermo well drilled from bar stock
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet. |
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Application |
|
|
Temperature
measurement in pipe systems and tanks with gasses and fluid medias such as air,
steam and water at high pressure and flow velocity. Operating range is up to
600°C, max. 450 bar (water) and 60 m/sec. (steam) |
1307 - Type
DS
Thermocouple assembly DS for welding with
interchangeable insert
|
|
Fields of application:
- Boilers
- Power plants
- Chemical process engineering
Technical features:
- Termoelement type J, K eller N iht. IEC 584-1
- Permissible mechanical and thermal stress acc. to DIN 43763
- Installed to the process by welding
- The measuring insert can be exchanged or calibrated without closing down the
process
- Measuring insert is a mineral insulated type, vibration proof
- Thermo well drilled from bar stock. Fast response time
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet |
|
|
|
|
|
|
Application |
|
|
Measurement of temperature in ducts and furnaces with air and flue gasses. The operating range is up to 800°C in the low-pressure range |
1308 - Type AF
Thermocouple assembly AFmesuring insert with
connection head
|
|
Fields of application:
- Chemical process engineering
- Drying equipment
- Process industry
Technical features:
- Thermocouple type J, K and N acc. to IEC-584-1
- Built as an
measuring insert acc. to DIN 43769
- Connected to the process by adjustable flange or compression fittings
- Fast response time
- Measuring insert is a mineral insulated type,
vibration proof
- Modular design and standard length minimize the necessary number of spares
- Optionally, can be supplied with head mounted transmitter
Ordering:
The requested sensor is selected from the below specification sheet |
|
|
|
|
|
See more Frode Pedersen Temperature Sensors
Ametek
Temperature Calibrators
|
|
|
|
|