ETM systems 1 & 2 - General industry
These are thermocouple systems with or
without data logging. They are supplied
with 4 different probes designed for
surface, penetration, atmospheric
measurements, and a flexible wire cable
probe. The systems also contain contact
paste, instructions, batteries,
protective rubber boot and space for the
EasyLink package containing infrared
interface and software. The kit is
supplied in a practical carrying case.
These systems can be used throughout the
process for control and logging of
temperature data.ETM system 2 & 3
- Food industry
These systems are primarily for control
of refrigeration and freeze
compartments, pasteurization, ovens,
sterilization units, and similar
applications. The systems employ Pt100
probes for optimum accuracy and are
available with or without data logging.
Both systems feature IP67 density for
resistance in wet environments. The
temperature range is from –50 to 250°C /
-58 to 482°F. (The indicator, however,
is able to measure from –150 to 800°C /
-238 to 1472°F). Each system contains 3
different probes: a penetration probe
with needle tip, a general-purpose
probe, and an atmospheric probe. The
systems are delivered in a practical
carrying case with instructions,
batteries, protective rubber boot, and
space for the EasyLink package.
ETM system 5 - Heating and
ventilation (HVAC)
This is a thermo couple system for use
up to 1200°C / 2192°F. The system
contains 4 probes: a general-purpose
probe, a penetration probe for flue gas,
a thin surface probe, and a flexible
wire cable probe. The system is
delivered in a practical carrying case
with contact paste, instructions,
batteries, and protective rubber boot. |
Data
logging
