 |
 |
|
|
|
JOFRA IPI INDUSTRIAL PRESSURE INDICATOR
Pressure indicator offering user-friendly features and reliable
performance
|
|
IPI - Industrial Pressure Indicator
JOFRA IPI indicators are the latest addition to our pressure instrument offering. These handy instruments bring together the ease of an analog gauge with the accuracy and easy-to-read display of a digital calibrator.
The IPI is available as an indicator or in one of 6 test ready systems that are complete and equipped to meet your pressure measuring or testing needs.
You can use the IPI in applications from safety valve checks to system pressure verification. |
See other digital systems
pressure calibrators:
 JOFRA
APC Series
JOFRA
CPC Series
JOFRA
EPM Series |
|
|
|
|
|
|
|
|
|
 |
|
IPI Indicator
This series is designed to meet your pressure measurement applications and make the tasks easier. The IPI offers 18 different pressure units, long battery life, high accuracy, and even serial communications. The accuracy of the IPI rivals that of a pressure calibrator and is temperature compensated for shop or in process applications. This versatile unit is available as a stand alone indicator, in a complete test system, and can be attached to M&G diaphragm seals for true in process applications.
You can perform a calibration locally without returning the IPI unit to the manufacturer. All you need is an accurate pressure reference. If you do require factory calibration, the pump and indicator are independent and only the indicator needs to be returned.
With the IPI, you get a versatile and easy-to-use pressure indicator with a fast and straightforward setup, intuitive functions, and application flexibility. |
|
|
|
|
|
|
|
|
|
|
 |
|
In-process indicator
You can use the IPI as your in-process pressure indicator. The IPI is an optimal device for this application. You can select the sampling rate to extend your battery life; or use the external power supply option to allow for continuous readings without the need for battery replacement.
The IPI offers a higher accuracy than analog process gauges. With the backlit display, it is easier to read as well. You can also access the temperature; something that you cannot read on a standard process gauge. The bar graph provides a quick indication of the percentage of scale reading allowing for a rapid assessment of system conditions.
The IPI can be easily mounted to M&G diaphragm seals to meet 3-A regulations or to prevent a hazardous process from affecting the sensor. There are several different seal designs and sizes available to meet your application. |
|
|
|
|
|
|
|
|
|
|
 |
|
Clear dual line display
The IPI display does more than just show a pressure reading. The user can check temperature and exact battery voltage through the use of the keypad. The large, 5 1/2 digit, 0.65 in (1.65 cm) character display is large and easy-to-read; even from a distance. Icons are also included to indicate battery life, engineering units, and there is a bar graph that shows the percentage of scale reading. All of this information can be read in low light with the use of the backlight.
Protective boot
Standard configuration IPI units and those supplied with systems are delivered with a protective boot. Units with back mounting and the 24 VDC power supply are not delivered with the protective boot due to design limitations. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System A
- 0 to 15 psi (1 bar)
- 0 to 30 psi ( 2 bar)
- 0 to 100 psi (7 bar)
- 0 to 300 psi (21 bar)
This system includes the JOFRA IPI indicator together with one of the following pneumatic hand pumps: T-730, T-740 or T-750, depending on the chosen pressure range and options. System A is an easy-to-use single-hand operated test system.
The System A comes in a protective carrying case with cutouts for fittings, hose, and the complete assembled test unit - no time is required to assemble the unit every time you need it. The indicator can at any time be used separately for other pressure test tasks. A swivel fitting between the pump and the indicator makes it possible to to adjust the indicator for easy viewing.
All IPI indicators used in System A are delivered calibrated in both pressure and vacuum. If a combination pump is required see System B. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System B
- Vacuum to 300 psi (21 bar)
- Vacuum to 500 psi (35 bar)
This system includes a dual function pneumatic hand pump. With this pump you can generate both vacuum and pressure for your applications. It takes just a few seconds to switch between vacuum and pressure, just push one button (valve) on the T-910
hand pump.
The System B comes in a protective carrying case with cutouts for fittings, hose and the complete assembled test unit - no time required to assemble the unit every time. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System C
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
- 0 to 5,000 psi (350 bar)
This system consists of an IPI indicator together with a hydraulic, high pressure hand pump T-620 or T-620H, which features an oil reservoir to prime the system.
System C is an easy-to-use single-hand operated test system. No need for a flat surface (table) to operate the system. The system includes release valve and vernier valve for fine adjustment to enable safe and simple operation of the pump.
The System C comes in a protective carrying case with cutouts for fittings, hose, and the complete assembled test unit - no time adder to assemble the unit every time. Easy and fast connection between pump and indicator makes it easy to use the pressure indicator separately for other pressure test tasks. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System D
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
- 0 to 5,000 psi (350 bar)
This system consists of an IPI indicator together with a rugged, hydraulic, high pressure
screw pump.
System D is an easy-to-use test system. Place the pump on a flat surface and turn the handle to generate pressure. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of the test device, a fine adjustment vernier valve (optional), and a reservoir for extra oil or water (optional).
The System D comes in a protective carrying case with cutouts for fittings and the complete assembled test unit - no time adder to assemble the unit every time. Easy and fast connection between pump and indicator makes it easy to use the pressure calibrator separately for other pressure test tasks. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System E
- 0 to 1,000 psi (70 bar)
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
- 0 to 5,000 psi (350 bar)
- 0 to 10,000 psi (700 bar)
This system consists of an IPI indicator together with a rugged, hydraulic, high pressure pump.
System E is an easy-to-use test system. The hydraulic pump makes it very easy to prime the system. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard.
The System E comes in a protective carrying case with cutouts for fittings and the complete assembled test unit - no time adder to assemble the unit every time. Easy and fast connection between pump and indicator makes it easy to use the pressure calibrator separately for other pressure test tasks. |
|
|
|
|
|
|
|
|
|
|
 |
|
JOFRA IPI System F
- Vacuum to 500 psi (35 bar)
- 0 to 1,000 psi (70 bar)
- 0 to 2,000 psi (140 bar)
- 0 to 3,000 psi (200 bar)
- 0 to 5,000 psi (350 bar)
- 0 to 10,000 psi (700 bar)
System F is an easy-to-use test system. The hydraulic pump makes it very easy to prime the system. The pump contains 75 in3 / 1.23 l of liquid.
The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard. The System F comes in a protective carrying case with cutouts for fittings. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks. |
|
|
|
|
|
|
|
|
